Position Indicating Strobe Light for Lifeboat (MED/SOLAS)

MED/SOLAS approved position indicating strobe light for lifeboat, enhances visibility during emergencies, especially in low-light or dark conditions.

Contact :

Product Features:

MED/SOLAS approved position indicating strobe light for lifeboat, enhances visibility during emergencies, especially in low-light or dark conditions.
This light is intended for motorised survival craft and to be connected to the crafts 12V electrical system.
The light should be mounted on the canopy of the lifeboat to enhance visibility.
The flashing light produces a minimum of 4.3cd of in all directions.
No battery replacement required.

Technical Specifications

Model	DSW9812
Type Of Light	Halogen Lamp
Output Power	DC12V, 13W
Flash Frequency	50-70 times/minute
Flash Intensity	≥4.3cd
Material	PC, ABS
Size	Ø102mm x 115mm
Activation Method	The wire must be manually connected to the power supply equipment on the boat, and the light should be installed on the canopy of the lifeboat to ensure higher visibility.
Approval	RINA
Testing Standards	IMO Res. MSC.81 (70), as amended, EN 60945:2002 incl. IEC 60945 Corr.1:2008, ISO 24408:2005
Reference Standards	SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/32, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1628
Approval	CCS
Approval Standards	Regulations 4,7,22,26,32 and 34, Chapter III of International Convention for the Safety of Life at Sea, 1974, as amended. Chapter I,II and IV of MSC.48(66) International Life-saving Appliance Code, as amended. Part 1 of MSC.81(70) Revised Recommendation on Testing of Life-saving Appliance, as amended.

Position Indicating Strobe Light for Lifeboat

Technical Data sheet

pdf - 616 KB